Comment on page
Gyroscope calibration
Auterion Mission Control will guide you to place the vehicle on a flat surface and keep it still.
The calibration steps are:
- 1.Select the Vehicle Setup view and then Sensors > Gyroscope in the left sidebar.
- 2.Place the vehicle on a surface and leave it still. Mission Control automatically restarts the gyroscope calibration if the vehicle moves before it completes.
- 3.Click OK in the prompt to start the calibration. The bar at the top shows the progress:
- 4.Once the calibration is complete the gyroscope status indicator will turn green and the completion status displayed.
Last modified 10mo ago