Skynode X Integration and Development Kit
Throughout this section the different components included in the Skynode X accompanying kits are presented along with the initial steps needed to successfully connect and operate them with Skynode X.
Skynode X Integration and Development Kit Overview

Skynode X Integration Kit
This list details the components currently included in the standard Integration Kit (860-00039) provided with Skynode X.
​
​​​
830-00029
​
Used to break out the Skynode flight control interfaces on J3 and J4 into Pixhawk-standard compatible connectors/pinouts.
​
​​​
127-00005
WIFI Antenna 2.4/5GHz Antenna Wifi/Bluetooth. This antenna is white
115-00043
SKND USB ADAPTER JST GH 4-pin to USB-A female cable
​​​
115-00063
PWR SKND 5V Molex Micro-Lock Plus 6-pin to Molex CONN PLUG HSG 6-pin (Skynode X/power module cable)
Note: Only use the cable included in the kit. Similar cables available e.g. on Digikey are not compatible with Skynode.
​​​
115-00037
PRIMARY/SECONDARY Molex Pico-Clasp 40-pin (Skynode to Pixhawk adapter board cable)
​​​
115-00053
PAYLOAD BUS FFC 30-pin (PPB adapter board cable)
115-00009
WIFI ANTENNA EXTENSION Cable to connect the Wi-Fi antenna to Skynode
​
127-00007
LTE Antenna LTE
115-00042
Cable Radio ETH ground
Skynode X Development Kit
In addition to the Skynode X Integration Kit, the Skynode X Development Kit (860-00042) is also available for purchase for testing purposes.
115-00045
PIXHAWK 4-PIN JST GH 4-pin to JST GH 4-pin (cable)
115-00046
PIXHAWK 6-PIN JST GH 6-pin to JST GH 6-pin (cable)
115-00047
RC RECEIVER JST GH 3-pin to pigtail/open lead (SBUS cable)
115-00048
PIXHAWK 11-PIN JST GH 11-pin to JST GH 11-pin (SPI cable)
115-00044
USB-Cable USB-C to USB-A (Skynode to ground station cable for developers)
115-00050
PWR ADAPTER XT60 Cable barrel connector to XT60 (adapter for power supply cable to power module input)
170-00002
POWER SUPPLY AC/DC power supply (24V 36W)
125-00006
PLUG NA Socket adapter for North America
125-00001
PLUG EU Socket adapter for Europe
Last updated