Power Module
Last updated
Last updated
The Skynode Evaluation Kit includes a power module which is used to power Skynode from a battery with up to 6 Cells (9V to 30V). The power module includes a 5V regulator with a maximum current rating of 5A. Furthermore the power module is used to measure battery voltage and current to the flight controller. Lastly the power module also provides a secondary battery voltage output for the Microhard module. This output is directly connected to the battery input and therefore provides the same voltage level as the input.
ID | Name | Connector | Description |
J1 | VBAT_IN | XT60 | Battery voltage input |
J2 | VBAT_OUT | XT60 | Battery voltage output |
J3 | VOUT_5V | Molex Micro-Lock Plus 5055670681 | 5V regulated power supply for Skynode |
J5 | VBAT_PERIPH | Molex Micro-Fit 3.0 0436500210 | Battery voltage for other peripherals |
Maximum voltage: 36V Maximum current: 45A (continuous)
Exceeding these limits can permanently damage the power module.
Pin | Name | Dir | Lvl | Function |
1 | VBAT_IN | IN | VBAT | Connected to battery or power supply |
2 | GND | Ground |
Output is not fused or current limited.
Pin | Name | Dir | Lvl | Function |
1 | VBAT_OUT | OUT | VBAT | Connects to ESCs and other high-current components |
2 | GND | Ground |
Maximum output current 5A.
Pin | Name | Dir | Lvl | Function |
1 | VDD_5V | OUT | 5.3V | 5V output |
2 | VDD_5V | OUT | 5.3V | 5V output |
3 | I2C_SCL | I/O | 3.3V | Voltage/Current reporting via I2C |
4 | I2C_SDA | I/O | 3.3V | |
5 | GND | Ground | ||
6 | GND | Ground |
Power supply connector for the Microhard Communication Module.
Pin | Name | Dir | Lvl | Function |
1 | GND | Ground | ||
2 | VBAT_OUT | OUT | VBAT | 8A fused |
