> For the complete documentation index, see [llms.txt](https://docs.auterion.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.auterion.com/vehicle-operation/auterion-mission-control/fly/gps-denied-workflow.md).

# GPS Denied Workflow

Fly without GPS: choose navigation sources, monitor position quality and correct the vehicle's position and heading by hand.

When GPS is jammed or unavailable, AMC lets you choose which navigation sources the vehicle uses, monitor its position estimate and correct it by hand.

{% hint style="info" %}
The vehicle must be configured for GNSS-denied operation. **VisNav**, **Beacons** and **LEO Satellite** appear only on vehicles equipped for them.
{% endhint %}

## Navigation sources

| Source            | Label (colour) | Description                                           |
| ----------------- | -------------- | ----------------------------------------------------- |
| **GPS**           | GPS (health)   | Satellite navigation. The colour shows GPS health.    |
| **VisNav**        | VIS (purple)   | Position from matching the camera view to the ground. |
| **Beacons**       | BCN (yellow)   | Position from ground-based radio beacons.             |
| **LEO Satellite** | LEO (red)      | Position from low-earth-orbit satellite signals.      |
| None              | INS (grey)     | Inertial sensors only. The position drifts over time. |

Several sources can be fused at the same time.

## Enable GNSS-denied features

Open **GPS Advanced Settings** from the Vehicle Menu (**More** → **GPS Advanced Settings**) or from the navigation-mode indicator in the top bar.

<figure><img src="https://3329189600-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FFW1Ge1p1f6WHyiYCb146%2Fuploads%2FPolJHy95Jzq9lP4Tz7Ew%2Fquick_vehicle_gps_adavanced.gif?alt=media&amp;token=ecc8da7c-0e62-465a-ad63-fde1e6799839" alt=""><figcaption></figcaption></figure>

<figure><img src="https://3329189600-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FFW1Ge1p1f6WHyiYCb146%2Fuploads%2FviOExkJ23lZfnonflXBH%2Fgps_advanced_mode_toolbar.gif?alt=media&amp;token=8b5d8740-7b46-4867-afa7-a31f8f544ae4" alt=""><figcaption></figcaption></figure>

Turn on **Enable selection of navigation mode, show accuracy radius, and allow manual position reset.** to show the rest of the panel. Turning it off restores the default: GPS on, all other sources off.

<figure><img src="https://3329189600-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FFW1Ge1p1f6WHyiYCb146%2Fuploads%2Fqz0DGN0NsSyQFtln6YPp%2Fenable_settings_navigation_mode.gif?alt=media&amp;token=02ed942a-f07f-4cb4-8edf-83e0a885d160" alt=""><figcaption></figcaption></figure>

| Setting                                                                 | Effect                                                            |
| ----------------------------------------------------------------------- | ----------------------------------------------------------------- |
| **Navigation Mode Configuration**                                       | Turns each source on or off.                                      |
| **Visualize raw GPS Position and Auxiliary Global Position on the map** | Shows each source's own position on the map.                      |
| **Select Vision System**                                                | VisNav only: the camera VisNav uses.                              |
| **Navigation Mode Fallback Configuration**                              | Sources turned back on automatically if the link to AMC is lost.  |
| **Manually set the wind direction and speed**                           | Enables wind input before takeoff, see [Wind Speed](#wind-speed). |
| **Allow takeoff without a GPS lock**                                    | Lets the vehicle arm without a GPS fix.                           |
| **Manually set the vehicle's Home Position**                            | Adds **Home Position** to the Positioning tool.                   |

If the VisNav app on the vehicle is too old, a warning appears under **Select Vision System**. Update the app.

## Before takeoff

1. **Position:** if the vehicle has no valid position, AMC opens [Vehicle Position](#vehicle-position). Tap the map where the vehicle is and confirm.
2. **Heading:** set it with [Vehicle Heading](#vehicle-heading) if the compass is unreliable.
3. **Wind:** set it with [Wind Speed](#wind-speed) if the vehicle requires it.
4. **Preflight checklist:** with **Allow takeoff without a GPS lock** on, the GPS check passes.

## Choose the navigation mode

The navigation-mode indicator in the top bar shows the active sources: GPS with its fix type, a tile for each other source, or **INS** when nothing is fused.

Select the indicator and turn sources on or off. The switch settles once the vehicle confirms; if the vehicle rejects the change, it returns to its previous position.

<figure><img src="https://3329189600-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FFW1Ge1p1f6WHyiYCb146%2Fuploads%2FlIMnxScljgnpzPienoLn%2Fdisable_gps.gif?alt=media&amp;token=9e3c8a35-d979-4c5c-8b13-439de8a98025" alt=""><figcaption></figcaption></figure>

{% hint style="danger" %}
The navigation mode resets to the vehicle's default on every reboot. Check the indicator after each power cycle.
{% endhint %}

## Monitor position quality

* **Accuracy circle:** the light-blue circle around the vehicle grows as the position estimate drifts.
* **Source markers:** one arrow per source, coloured like the top bar. The distance from the vehicle icon shows how much the source and the estimate disagree.
* **Stale data:** a marker pulses when its data is a few seconds old, then disappears. The vehicle icon pulses when its position is invalid.
* **VTOL:** a compass icon turns red when the horizontal velocity estimate is invalid.

## Correct position and heading

Open **Flight tools** → **Positioning** in the Fly View tool strip.

### Vehicle Position

Available while GPS is not fused. Drag the **Vehicle Here** marker to the vehicle's real position, or type the coordinates, then select **Confirm**. In flight, the vehicle blends the correction with its own estimate instead of jumping to it.

<figure><img src="https://3329189600-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FFW1Ge1p1f6WHyiYCb146%2Fuploads%2FV94ReJm34KI6VrzI1Pss%2Fset_vehicle_position.gif?alt=media&amp;token=da891ccf-59fa-449d-91ac-fae63b3eb133" alt=""><figcaption></figcaption></figure>

### CFoV Position

Available in flight on vehicles with a gimbal, while GPS is not fused. Move the **CFoV Here** marker to the point at the centre of the video, then select **Confirm**. AMC works out the vehicle's position from the camera angle.

### Vehicle Heading

Tells the vehicle which way it is pointing; it does not turn the vehicle. Set the dial, then select **Confirm**. To turn the vehicle, use **POI** instead.

<figure><img src="https://3329189600-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FFW1Ge1p1f6WHyiYCb146%2Fuploads%2F1aYNFGr33oxFf6g0VJaC%2Fset_heading.gif?alt=media&amp;token=4b0f22e3-b1ef-48ac-9ddf-4e7ec1702032" alt=""><figcaption></figcaption></figure>

### Wind Speed

With the wind setting on and the vehicle disarmed, select the settings icon in the compass and enter the wind direction and speed. Some vehicles require it when GPS is off, before a mission or VTOL takeoff.

<figure><img src="https://3329189600-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FFW1Ge1p1f6WHyiYCb146%2Fuploads%2Fqq4Ax00ytSWiiBymHLfI%2Fset_wind_speed.gif?alt=media&amp;token=e5a07753-cd05-4492-9c32-72776b4f56d8" alt=""><figcaption></figcaption></figure>

### Home Position

With **Manually set the vehicle's Home Position** on, drag the **Home** marker to the new return location, then select **Confirm**.

<figure><img src="https://3329189600-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FFW1Ge1p1f6WHyiYCb146%2Fuploads%2FUnStJb0wohgojopl5ZHf%2Fset_home_position.gif?alt=media&amp;token=d8a49830-7277-4df3-8a6f-dc9707ec129c" alt=""><figcaption></figcaption></figure>

## Swarm operations

[Swarming](https://docs.auterion.com/vehicle-operation/auterion-mission-control/fly/multi-vehicle-operations.md)

## Troubleshooting

| Symptom                                                  | Fix                                                                                                |
| -------------------------------------------------------- | -------------------------------------------------------------------------------------------------- |
| No **GPS Advanced Settings** in the menu.                | The vehicle is not configured for GNSS-denied operation.                                           |
| A source switch is missing.                              | The vehicle is not equipped for that source.                                                       |
| A source switch returns to its previous position.        | The vehicle rejected the change. Check it supports that source and runs AuterionOS 4.4.9 or later. |
| **Vehicle Position** or **CFoV Position** is greyed out. | Turn GPS off first. CFoV also needs the vehicle in flight with a gimbal.                           |
| Plan upload fails with *Invalid global position*.        | Set the position with **Vehicle Position**, then upload again.                                     |
| Navigation mode changed after a reboot.                  | Expected: it resets to default on every reboot.                                                    |
