Links

Payloads

Supported Cameras

Auterion supports and maintains the following cameras:

Supported Gimbals

General Setup - same for all payloads

  1. 1.
    Connect the payload to the port described in the corresponding sections linked above
  2. 2.
    Power Skynode
  3. 3.
    Open Auterion Mission Control > Fly View. A video switcher should be displayed in the bottom left corner.
    If the video switcher shown above is not displayed:
    • Use the menu (top left) to open Settings > General, and scroll to the "Video" section.
    • Select RTSP Video Stream as video source as shown:
  4. 4.
    Click on the video feed (left corner) to make the video screen full screen and get the camera controls. For more information see: Auterion Mission Control > Fly View UI Overview.